You are currently viewing Hastelloy C22 Flanges Manufacturer
Hastelloy C22 Flanges

Hastelloy C22 Flanges Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy C22 Flanges to the esteemed clients, which are manufactured by using pristine grade stainless steel. Hastelloy C22 Slip On Flanges (UNS N06022) is used in Chlorination systems, Nuclear fuel reprocessing, Pickling systems, and more. Hastelloy C22 Threaded Flanges has outstanding resistance to both reducing and oxidizing media and because of its resistibility can be used where “upset” conditions are likely to occur. Hastelloy C22 Spectacle Blind Flanges is also in a wide variety of hazardous waste management technologies where high corrosion – resistance of critical equipment is required for reliability, safety, and cost effectiveness / reduced maintenance. Meanwhile, these Hastelloy C22 Weld Neck Flanges are also being offered in customized sizes and shapes to our customers.

We also offer these Hastelloy C22 Lap Joint Flanges at market leading rates. A common solution for assessing the resistance of Hastelloy C22 Socket Weld Flanges to this extremely destructive form of attack is boiling 45 % magnesium chloride, typically with stressed U-bend samples. Crevice tests of Hastelloy C22 Ring Joint Type Flanges were performed in both still (quiescent) and flowing seawater, at 29 Degree C, plus or minus 3 Degree C.

Hastelloy C22 Flanges | Hastelloy C22 Flanges | Hastelloy C22 Flanges | Hastelloy C22 Flanges | Hastelloy C22 Flanges | Hastelloy C22 Flanges | Hastelloy C22 Flanges

As is evident from the following results, Hastelloy C22 Nippon Flanges are much more resistant to this form of attack than the comparative, austenitic stainless steels. We also offer these Hastelloy C22 Spacer Flanges at reasonable rates with customized options for its sizes, shapes and designs.

Hastelloy C22 Pipe Flanges Specifications

Specifications : ASTM B564 / ASME SB564
Size : 1/2″NB TO 60″NB
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Hastelloy Alloy C22 Pipe Flanges Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Hastelloy C22 Plate Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W

Alloy C22 Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C22 Pipe Flanges Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy C22 Flanges
lap joint flanges

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy C22 Flanges to the esteemed clients, which are manufactured by using pristine grade stainless steel.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply