Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Duplex S31803 Tube to Female Pipes, which is normally supplied in the solution – annealed condition. Forging of these Duplex S31803 Tube Fittings should be started immediately the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible. For optimum corrosion resistance, forged parts of Duplex S32205 Tube Fittings should be subsequently annealed. Treatment of these Duplex S31803 Compression Fittings is carried out at 2050 Degree F (1120 Degree C) followed by water quench or rapid air cool.
The treatment in Duplex S32205 Compression Fittings is performed after hot working to ensure optimum corrosion resistance and between cold – working operations. These Duplex S31803 Female Connector Fittings is considered moderate till difficult to machine, but can be machined using conventional methods. Duplex S32205 Female Connector Fittings has a high work hardening rate, and efficient machining requires rigid and overpowered machines, sharp tools, preferably carbide – tipped, and heavy, constant feeds.
Duplex S31803 Tube to Female Pipes Manufacturer In India| Duplex S31803 Tube to Female Pipes Manufacturer In Mumbai | Duplex S31803 Tube to Female Pipes Exporter In India| Duplex S31803 Tube to Female Pipes Exporter In Mumbai| Duplex S31803 Tube to Female Pipes Supplier In India | Duplex S31803 Tube to Female Pipes Supplier In Mumbai | Duplex S31803 Tube to Female Pipes Stockist In India | Duplex S31803 Tube to Female Pipes Stockist In Mumbai
In chemical processing applications, these Duplex S31803 Ferrule Fittings has exceptional resistance to sulphuric, hydrochloric, formic, acetic, and phosphoric acids. Duplex S32205 Ferrule Fittings performs well in environments containing acid chlorides, solvents and acetic anhydride. These Duplex S31803 Double Ferrule Fittings is one of the few grades that withstand wet chlorine gas, hypochlorite and chlorine dioxide solutions.
Duplex S31803 / S32205 Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM A815 ASME SB815 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 4000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
S31803 / S32205 Duplex Tube to Female Pipes Fitting Chemical Composition
| S31803 / S32205 | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
| 1.0 | 0.03 | 0.02 | 2.0 | 3.0 – 3.5 | 22.0 – 23.0 | 0.03 | 4.5 – 6.5 | 0.14 – 0.2 | Bal |
Duplex Steel S31803 / S32205 Tube to Female Pipes Fitting Mechanical Properties
| S31803 / S32205 | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
Equivalent Grades for S31803 / S32205 Duplex Stainless Steel Tube to Female Pipes Fitting
| STANDARD | UNS | WERKSTOFF NR. |
| Duplex S31803 | S31803 | 1.4462 |
| Duplex S32205 | S32205 | 1.4462 |
Duplex S31803 / S32205 Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Duplex S31803 / S32205 Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 102014/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 102014 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 102014/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10S31803 / S322054 3.1 and EN 10S31803 / S322054 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Duplex S31803 Tube to Female Pipes
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Duplex S31803 Tube to Female Pipes, which is normally supplied in the solution – annealed condition. Forging of these Duplex S31803 Tube Fittings should be started immediately the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
