Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Copper Nickel 90/10 Chain and other cupro-nickel products, which are easily weldable and have good cold- and hot-working qualities. We offer a large selection of Copper Nickel 90-10 Angles, which are frequently used for bracing, structural supports, shelves, brackets, architectural trim, and other parts requiring grinding, machining, welding, or polishing. These angles have high corrosion resistance, high strength, temperature resistance, and a smooth surface that is easy to clean.
Copper Nickel 90/10 Chain Manufacturer In India | Copper Nickel 90/10 Chain Manufacturer In Mumbai | Copper Nickel 90/10 Chain Exporter In India | Copper Nickel 90/10 Chain Exporter In Mumbai | Copper Nickel 90/10 Chain Supplier In India | Copper Nickel 90/10 Chain Supplier In Mumbai | Copper Nickel 90/10 Chain Stockist In India | Copper Nickel 90/10 Chain Stockist In Mumbai
Cupro Nickel 90/10 Angle offers excellent resistance to stress corrosion, erosion, and befouling in seawater and brackish water. The main causes are the Cupro Nickel 90/10 Angle composites’ composition and manufacture, the incidence of erosion-corrosion, and corrosion damage in contaminated waters. This material is an assessment of the Cupro Nickel 90/10 Chain’s corrosion and befouling resistance based on laboratory test results and verified experience using the alloy in maritime conditions.
Wires that are commonly utilized for low-temperature applications, such as heating cables, are formed using Cupro Nickel 90/10 C-Channel. In aqueous situations, Cupro Nickel 90/10 H-Beam exhibits unmatched resistance to soil erosion and abrasive fluids. Excellent fabrication and welding properties, high resistance to hydrogen embrittlement, and the retention of mechanical properties down to cryogenic temperatures are all features of the Cupro Nickel 90/10 I-Beam.
Even after multiple thermal and mechanical processing steps, the alloying components in Cupro Nickel 90/10 T-Beam do not homogenize. For heat exchanger or condenser tubes in a variety of marine applications, Cu-Ni 90/10 Angle varying in composition is frequently requested. Cu-Ni 90/10 Chain also delivers increased strength for higher pressures. Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, and more are just a few uses for Cu-Ni 90/10 Angle, Channel & Beam.
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B151 / ASME SB151 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Cu-Ni 90/10 Angle |
: | 5mm to 9mm |
| Cu-Ni 90/10 Channel |
: | 40mm*20mm~300mm*300mm |
| Cu-Ni 90/10 Beam | : | 3″ thru 12.31″ |
| Cu-Ni 90/10 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
90/10 Cupro Nickel Angle, Channel, Beam, Chain Chemical Composition
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cu-Ni 90/10 | 88.6 min | 1.0 max | 0.05 max | 9-11 max | 1.8 max | 1 max |
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Equivalent Grades for 90/10 Cupro Nickel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| Cupro Nickel 90/10 | 2.0872 | C70600 |
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
90/10 Cupro Nickel Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Copper Nickel 90/10 Chain
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Copper Nickel 90/10 Chain and other cupro-nickel products, which are easily weldable and have good cold- and hot-working qualities. We offer a large selection of Copper Nickel 90-10 Angles, which are frequently used for bracing, structural supports, shelves, brackets, architectural trim, and other parts requiring grinding, machining, welding, or polishing. These angles have high corrosion resistance, high strength, temperature resistance, and a smooth surface that is easy to clean.
Product Brand: Sachiya Steel International
Product Currency: INR
Product Price: 80
Product In-Stock: InStock
5