Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Carbon Steel AISI 1018 Chain and other Carbon Steel Products. Our AISI 1018 Carbon Steel C-Channel is used extensively in maritime applications and other non-oxidizing chloride solutions because of its resistance to a variety of corrosive situations. Carbon Steel AISI 1018 steel is highly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. This AISI 1018 Carbon Steel Angle has exceptional resistance to stress-corrosion cracking in most freshwaters and a low corrosion rate in quickly flowing brackish or seawater.
Carbon Steel AISI 1018 Chain Manufacturer In India | Carbon Steel AISI 1018 Chain Manufacturer In Mumbai | Carbon Steel AISI 1018 Chain Exporter In India | Carbon Steel AISI 1018 Chain Exporter In Mumbai | Carbon Steel AISI 1018 Chain Supplier In India | Carbon Steel AISI 1018 Chain Supplier In Mumbai | Carbon Steel AISI 1018 Chain Stockist In India | Carbon Steel AISI 1018 Chain Stockist In Mumbai
These AISI 1018 Carbon Steel T-Beam provide quicker machining rates, longer tool lives, greater product quality, and lower overall machining costs. After soaking at forging temperature for 30 minutes per inch of billet or ingot section thickness, our AISI 1018 CS Angle is forged between 2250°F and 1750°F (1230°C and 955°C). The most widely used grade of low carbon steel in the world, AISI 1018, provides a good balance of toughness, strength, and ductility. It offers shaped, machined, welded, and constructed steel with ease even if its mechanical characteristics are not very distinctive.
The finest steel for carburized parts is AISI 1018 steel because of its great weldability and ability to make a consistent, tougher casing. It can be hardened using surface-hardening techniques like carburizing. It can be carburized to reach the standard surface hardness of HRC 58.
Carbon Steel AISI 1018 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | AISI A1018 |
| Dimensions | : | EN, DIN, JIS, AISI, BS, ASME, AISI |
| Carbon Steel AISI 1018 Angle |
: | 5mm to 9mm |
| Carbon Steel AISI 1018 Channel |
: | 40mm*20mm~300mm*300mm |
| Carbon Steel AISI 1018 Beam | : | 3″ thru 12.31″ |
| Carbon Steel AISI 1018 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
AISI 1018 Angle, Channel, Beam, Chain Chemical Composition
| Grade | Mn | S | C | P | Si | Cr | Mo |
| AISI 1018 | 0.4-0.8 | 0.04 | 0.28-0.33 | 0.035 | 0.15-0.35 | 0.8-1.1 | 0.15-0.25 |
Carbon Steel AISI 1018 Angle, Channel, Beam, Chain Mechanical Properties
| Grades | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (ksi) min | Hardness |
| AISI1018 | 675 | 12 | 400 | 229 |
Equivalent Grades for AISI 1018 Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| AISI 1018 | 1.0453 | G10180 |
Carbon Steel AISI 1018 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
AISI 1018 Steel Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Carbon Steel AISI 1018 Chain
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Carbon Steel AISI 1018 Chain and other Carbon Steel Products. Our AISI 1018 Carbon Steel C-Channel is used extensively in maritime applications and other non-oxidizing chloride solutions because of its resistance to a variety of corrosive situations. Carbon Steel AISI 1018 steel is highly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. This AISI 1018 Carbon Steel Angle has exceptional resistance to stress-corrosion cracking in most freshwaters and a low corrosion rate in quickly flowing brackish or seawater.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5