Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Brass Wire Mesh, where the lower ductility restricts some very severe operations. Brass Hexagonal Wire Mesh has a higher yield strength, higher tensile strength and lower work hardening rate compared to 316. Brass Welding Wire Mesh has quite good deep drawing capability; close to that of 316, but it has limited ability to stretch form. If very severe cold working is required in Brass Netting Wire Mesh, it may be necessary to carry out an intermediate anneal.
Brass Wire Mesh Manufacturer In India | Brass Wire Mesh Manufacturer In Mumbai | Brass Wire Mesh Exporter In India | Brass Wire Mesh Exporter In Mumbai | Brass Wire Mesh Supplier In India | Brass Wire Mesh Supplier In Mumbai | Brass Wire Mesh Stockist In India | Brass Wire Mesh Stockist In Mumbai
Brass Woven Wire Mesh is an austenitic stainless steel grade with a useful combination of corrosion resistance and high strength. Because it has almost no molybdenum and low nickel content, Brass Spring Steel Wire Mesh is an economical alternative to 304 or 316 in some applications. Brass Fencing Wire Mesh cannot be hardened by thermal treatment, but does work harden.
We are proactive organization Specialist in Brass Hex Wire Mesh and other quality products that meet and exceed customer’s specific requirements and thus ensure complete satisfaction. Brass Wire Mesh is easier to machine than the standard austenitic grades such as 316, but the grade is not commonly available as a bar. Our spherical Brass Welding Wire Mesh has a high level of sphericity, low oxygen content, high density (bulk and tapped) and as well as controlled grain size.
Brass Wiremesh Specifications |
||
| Specifications | : | ASTM B62 / ASME SB62 |
| Standard | : | ASTM, ASME and API |
| Length | : | 100 mm To 3000 mm Long & Above |
| Types | : | Wire Mesh, Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh, Spring Steel wire mesh, Fencing Wiremesh etc. |
Brass Wire Mesh Chemical Composition
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
Brass Wire Mesh Physical Properties
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modulas of Elasticity in Tension | 14000 ksi |
Brass Wire Mesh Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Brass Wiremesh Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Brass Wire Mesh
Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Brass Wire Mesh, where the lower ductility restricts some very severe operations. Brass Hexagonal Wire Mesh has a higher yield strength, higher tensile strength and lower work hardening rate compared to 316. Brass Welding Wire Mesh has quite good deep drawing capability; close to that of 316, but it has limited ability to stretch form. If very severe cold working is required in Brass Netting Wire Mesh, it may be necessary to carry out an intermediate anneal.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5