Aluminum Angle Manufacture


Sachiya Steel International offers a widespread array of Aluminum Angle And Aluminum Other Products, which is being offered in different shapes and sizes as per clients’ requirements. We supply Aluminum 6061 Angle for a variety of applications and will help in determining the precise amount for your current project. Although Aluminum 6082 C-Channel was designed for use in sulphuric acid related industries; it finds wide usage throughout the chemical processing industry. Common elements that are added to make Aluminum 5083 Chain are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium.

With enough of these elements, the austenitic structure of Aluminum 5086 I-Beam may be obtained at room temperature. Carbide – forming elements in Aluminum 5052 T-Beam raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements. For applications requiring maximum ductility, Aluminum 6063 H-Beam with low Sulphur levels can be supplied by producers using ladle – refining techniques.

Aluminum Angle | Aluminum Angle | Aluminum Angle | Aluminum Angle | Aluminum Angle | Aluminum Angle | Aluminum Angle

Sachiya Steel International is one of the pioneer exporter and trader of Aluminum Steel 7075 Angle, which is also being offered to our clients in personalized sizes and shapes as per requirements. As corrosion is an important issue in off – shore applications for Aluminum Steel 1100 C-Channel, the expansion joints are painted with a three layered and two component Epoxy paint. In Aluminum Steel 6061 Chain, a two component polyurethane high glossy coat was added, which provides a robust protective coating in the severely corrosive atmospheric environment.


Aluminum 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B308 / ASME B308
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Aluminum 6061 Angle : 5mm to 9mm
Aluminum 6061 Channel : 40mm*20mm~300mm*300mm
Aluminum 6061 Beam : 3″ thru 12.31″
Aluminum 6061 Chain : 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain


Aluminum Angle, Channel, Beam, Chain Chemical Composition

Grade Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
Aluminum 0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance 0.15 max

Mechanical Properties for Aluminum Angle, Channel, Beam, Chain

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
T6, T651 45 310 21 145 25 65

Physical Property for Aluminum Angle, Channel, Beam, Chain

Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS


Aluminum Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas ProceAluminiuming
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry


Aluminum Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.


Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• HardneAluminium Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and groAluminium weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or EmbaAluminiumy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality AAluminiumurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



Aluminum Angle

Sachiya Steel International offers a widespread array of Aluminum Angle And Aluminum Other Products, which is being offered in different shapes and sizes as per clients’ requirements.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:

Leave a Reply