Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Aluminium Steel Coil, Sheets And Plates, which is available at market-leading prices along with customized sizes and shapes for our customers. For applications requiring maximum ductility, our Aluminium 6061 Plates with low Sulphur levels can be supplied by producers using ladle-refining techniques. The easily exchangeable test pipeline of these Aluminium 6082 Coils is filled with the sample and cooled down to a set temperature. In general, wear resistance can be improved by increasing the hardness of our Aluminium 5083 Slating Coils, by specifying an alloy by means of greater carbon content (without increasing hardness), or by both.

Aluminium Steel Coil Manufacturer In India | Aluminium Steel Coil Manufacturer In Mumbai | Aluminium Steel Coil Exporter In India | Aluminium Steel Coil Exporter In Mumbai | Aluminium Steel Coil Supplier In India  |Aluminium Steel Coil Supplier In Mumbai | Aluminium Steel Coil Stockist In India | Aluminium Steel Coil Stockist In Mumbai
Aluminium Steel Coil

Aluminium Steel Coil

These Aluminium 5086 Perforated Coils, which have good mechanical properties both at ambient and elevated temperatures of up to 930 Degree F (500 Degree C), are readily fabricated using common industrial techniques. Low – temperature impact tests (to -50 Degree F) in our Aluminium Steel 5052 Plates are useful for many applications as toughness indicators under various service conditions and temperatures.

Our ability to provide these Aluminium Steel 6063 Coils on a project basis is one of our strongest capabilities and is also unmatched in our industry. Restricted carbon plus columbium stabilization in our Aluminium Steel 7075 Slating Coils permits welded fabrications to be used in corrosive environments, normally without post-weld heat treatment. These Aluminium Steel 1100 Perforated Coils appears to fall between both the stainless and nickel categories as it contains characteristics of both.

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB209
Size : 1000 mm x 60610 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 60610 mm x 60610 mm, 60610 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Aluminium Steel Coil, Sheets & Plates Chemical Composition

Alloy %
Si
%
Mg
%
Mn
%
Cu
%
Fe
%
Cr
%
Zn
%
Ti
%
Others
%
Al
EN AW-1050 A 0.25
Max
0.05
Max
0.05
Max
0.05
Max
0.40
Max
0.07
Max
0.05
Max
99.5 Min
EN AW-1070 A 0.20
Max
0.03
Max
0.03
Max
0.03
Max
0.25
Max
0.07
Max
0.03
Max
99.7 Min
EN AW-1100 Si+Fe 0.95 Max 0.05 Max 0.05 – 0.20 0.10 Max 0.05 Max 99.0 Min
EN AW-2011 0.40 Max 5.00 – 6.00 0.70 Max 0.30 Max Bi : 0.20 – 0.60
Pb : 0.20 – 0.60
Remainder
EN AW-2014 0.50 – 1.20 0.20 – 0.80 0.40 – 1.20 3.90 – 5.00 0.70 Max 0.10 Max 0.25 Max 0.15 Max Remainder
EN AW-2024 0.50 Max 1.20 -1.80 0.30 – 0.90 3.80 – 4.90 0.50 Max 0.10 Max 0.25 Max 0.15 Max 0.15 Max Remainder
EN AW-3003 0.60 Max 1.00 – 1.50 0.05 – 0.20 0.70 Max 0.10 Max 0.15 Max Remainder
EN AW-3103 0.50 Max 0.30 Max 0.90 – 1.50 0.10 Max 0.70 Max 0.10 Max 0.20 Max 0.10 Max Remainder
EN AW-6101A 0.30 – 0.7 0.40 – 0.90 0.03 Max 0.05 Max 0.40 Max 0.10 Max Remainder
EN AW-6005 0.60 – 0.90 0.40 – 0.60 0.10 Max 0.10 Max 0.35 Max 0.10 Max 0.10 Max 0.10 Max Remainder
EN AW-6351 0.70 – 1.30 0.40 – 0.80 0.40 – 0.80 0.10 Max 0.50 Max 0.20 Max 0.20 Max 0.15 Max Remainder
EN AW-6060 0.30 – 0.60 0.35 – 0.60 0.10 Max 0.10 Max 0.10 – 0.30 0.05 Max 0.15 Max 0.10 Max Remainder
EN AW-6061 0.40 – 0.80 0.80 – 1.20 0.15 Max 0.15 – 0.40 0.70 Max 0.04 – 0.35 0.25 Max 0.15 Max Remainder
EN AW-6063 0.20 – 0.60 0.45 – 0.90 0.10 Max 0.10 Max 0.35 Max 0.10 Max 0.10 Max 0.10 Max Remainder
EN AW-6082 0.70 – 1.30 0.60 -1.20 0.40 – 1.00 0.10 Max 0.50 Max 0.25 Max 0.20 Max 0.10 Max Remainder

Mechanical Properties for Aluminium Steel Coil, Sheets & Plates

Alloy Temper UTS (Mpa) Yield Strength (Mpa) Elongation (%)
Minimum Maximum Minimum Maximum A 50mm (Minimum)
EN AW-1050 A F 60 20 23
O 60 95 20 23
EN AW-1070 A F 60 20 23
EN AW-1100 O 75 110 25
EN AW-2011 T4 275 125 12
T6 310 230 6
EN AW-2014 O 250 135 10
T4 370 230 11
T6 415 370 5
EN AW-2024 O 250 150 10
T3,T3510,T3511 395 290 6
T8,T8510,T8511 455 380 4
EN AW-3003 F 95 35 20
O 95 135 35 20
EN AW-3103 F 95 35 20
O 95 135 35 20
EN AW-6101A T6 200 170 8
EN AW-6005 T4 180 90 13
T6 270 225 6
EN AW-6351 O 160 110 12
T4 205 110 12
T6 290 250 6
EN AW-6060 T4 120 60 14 12
T5 160 120 6
T6 190 150 6
T64 180 120 10
T66 215 160 6
EN AW-6061 O 150 110 14
T4 180 110 13
T6 260 240 6
EN AW-6063 O 130 16
T4 130 65 12
T5 175 130 6
T6 215 170 6
T66 245 200 6
EN AW-6082 O 160 110 12
T4 205 110 12
T5 270 230 6
T6 290 250 6

Physical Property for Aluminium Sheets, Plates & Coils

Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Aluminium Steel Coil
Aluminium Steel Coil Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Aluminium Steel Coil, Sheets And Plates, which is available at market-leading prices along with customized sizes and shapes for our customers. For applications requiring maximum ductility, our Aluminium 6061 Plates with low Sulphur levels can be supplied by producers using ladle-refining techniques.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5