Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel Grade 11 Coils, Sheets And Plates, which is integrally extended for the maximum surface area to achieve high tube efficiency. The high levels of mechanical support provided by Alloy Steel Grade 11 Plates are widely appreciated by our clients and the structural engineers directly involved in the complete process. Alloy Steel Grade 11 Coils is known for superior quality and high utility, which is widely demanded in various industries across the nation. Alloy Steel Grade 11 Slating Coils offers some great features such as High strength, Compact design, Perfect in dimension and more.

Alloy Steel Grade 11 Coils Manufacturer In India | Alloy Steel Grade 11 Coils Manufacturer In Mumbai | Alloy Steel Grade 11 Coils Exporter In India | Alloy Steel Grade 11 Coils Exporter In Mumbai | Alloy Steel Grade 11 Coils Supplier In India | Alloy Steel Grade 11 Coils Supplier In Mumbai | Alloy Steel Grade 11 Coils Stockist In India | Alloy Steel Grade 11 Coils Stockist In Mumbai

Under the guidelines of deft professionals, the offered Alloy Steel Grade 11 Perforated Coils is manufactured by using the best grade stainless steel with contemporary technology. Alloy Steel Gr. 11 Plates we offer are tested on defined quality parameters to reassure its flawlessness before the supply. Alloy Steel Gr. 11 Coils serves the oil, gas and petrochemical industry, where these industries require a pressure vessel grade steel which works well in elevated temperatures and our material serves this purpose well.

Alloy Steel Grade 11 Coils

Alloy Steel Grade 11 Coils

Alloy Steel Gr. 11 Slating Coils offered by Sachiya Steel International is from prime manufacturers & has zero rejections, where further we make it available to our patrons at suitable market leading cost. We provide Alloy Steel Gr. 11 Perforated Coils to our clients to make the order according to their specifications and requirements.

Alloy Steel Gr 11 Sheet, Plate & Coil Specifications

Specifications : ASTM A387 / ASME SA387
Thickness : 1mm-300mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, 4050mm etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm, 15000mm etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

Alloy Steel Gr 11 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Alloy Steel Gr 11 0.05 – 0.17 0.40-0.65 0.50 – 0.80 0.035 max 0.035 max 1.0 – 1.5 0.45 – 0.65

Alloy Steel Gr 11 Sheets, Plates & Coils Tensile Requirements

Tensile (MPa) Yield (MPa) Elongation (50mm) Elongation (200mm) Reduction of Area
415 – 585 240 min 22% min 19% min

Alloy Steel Gr 11 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel Gr 11 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Alloy Steel Grade 11 Coils
Alloy Steel Grade 11 Coils

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel Grade 11 Coils, Sheets And Plates, which is integrally extended for the maximum surface area to achieve high tube efficiency. The high levels of mechanical support provided by Alloy Steel Grade 11 Plates are widely appreciated by our clients and the structural engineers directly involved in the complete process

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5