Blog

Sachiya Steel International is one of the pioneer manufacturer and Exporter of AISI 4130 Angle, Channel, Beam, Chain, which has excellent quality that the possibility of designing thinner walls can save cost. Often referred to as an excellent grade due to the molybdenum content, AISI 4130 Angle has the ability to withstand high temperatures and maintain strength under volatile conditions. Commonly used as a replacement in critical components of larger constructions where SS 316L or SS 317L has failed by pitting or chloride stress corrosion cracking, AISI 4130 C-Channel withstands the same corrosive environments.

In new construction, AISI 4130 Chain has been found in many cases to be a technically adequate and more cost efficient substitute for other nickel based alloys and titanium, where the allowable design values may be about 50 % higher than those for standard austenitic steels. AISI 4130 I-Beam is often considered a “high end” austenitic stainless, which is further readily fabricated and welded.

AISI 4130 H-Beam offers chloride resistance superior to that of other alloys and is especially suited for high chloride environments such as brackish water or seawater. AISI 4130 T-Beam is an austenitic stainless steel, compatible with the common austenitic stainless steels, designed with high levels of chromium, molybdenum, and nitrogen for maximum resistance to pitting and crevice corrosion. Offered to client’s at the most reasonable rate possible, the offered range of AISI 4130 Steel Angle is known to have a high preference in the market.

4130 AISI Angle, Channel, Beam, Chain Chemical Composition

AISI 4130 Angle, Channel, Beam, Chain Mechanical Properties

Equivalent Grades for 4130 AISI Angle, Channel, Beam, Chain

AISI 4130 Angle, Channel, Beam, Chain Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas ProceAISIing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

4130 AISI  Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

AISI 4130 Angle

Sachiya Steel International is one of the pioneer manufacturer and Exporter of AISI 4130 Angle, Channel, Beam, Chain, which has excellent quality that the possibility of designing thinner walls can save cost.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5