Inconel Alloy 601 Pipe Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment. The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on. Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters. These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.

Inconel Alloy 601 Pipe Fittings Manufacturer In India | Inconel Alloy 601 Pipe Fittings Manufacturer In Mumbai | Inconel Alloy 601 Pipe Fittings Exporter In India | Inconel Alloy 601 Pipe Fittings Exporter In Mumbai | Inconel Alloy 601 Pipe Fittings Supplier In India | Inconel Alloy 601 Pipe Fittings Supplier In Mumbai | Inconel Alloy 601 Pipe Fittings Stockist In India | Inconel Alloy 601 Pipe Fittings Stockist In Mumbai
Inconel Alloy 601 Pipe Fittings
Inconel Alloy 601 Pipe Fittings

Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C). In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers. Alloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.

The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature range.

Inconel 601 Pipe Fittings / Accessories Specifications

Specifications : ASTM B166 ASME SB 166
Size : 1/16″ – 2″
Ends : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6010 Psi, 10000 Psi
Threads : NPT , BSPT, BSPP

Inconel 601 Pipe Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

Alloy 601 Accessories Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Pipe Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Alloy 601 Pipe Fittings / Accessories Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 601 Pipe Fittings / Accessories Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Inconel Alloy 601 Pipe Fittings
Inconel Alloy 601 Pipe Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment. The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on. Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters. These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Reply