Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Round Bar, where the passive layer on stainless steel can be attacked by certain chemical species. In normal atmospheric or water based environments, Stainless Steel 316 Square Round Bars will not corrode as demonstrated by domestic sink units, cutlery, saucepans and work – surfaces. In more aggressive conditions, Stainless Steel 316L Flat Round Bars may corrode and a more highly alloyed stainless steel can be used. The chloride ion is the most common of Stainless Steel 316 Threaded Round Bars and is found in everyday materials such as salt and bleach.
Stainless Steel 316 Round Bar Manufacturer In India| Stainless Steel 316 Round Bar Manufacturer In Mumbai| Stainless Steel 316 Round Bar Exporter In India| Stainless Steel 316 Round Bar Exporter In Mumbai| Stainless Steel 316 Round Bar Supplier In India| Stainless Steel 316 Round Bar Supplier In Mumbai| Stainless Steel 316 Round Bar Stockist In India| Stainless Steel 316 Round Bar Stockist In Mumbai
Pitting corrosion is avoided by making sure that Stainless Steel 316L Hollow Round Bars does not come into prolonged contact with harmful chemicals or by choosing a grade of steel which is more resistant to attack. The resistance of Stainless Steel 316 Hexagonal Round Bars can be assessed using the Pitting Resistance Equivalent Number calculated from the alloy content.
Stainless Steel 316L Triangular Round Bars requires a supply of oxygen to make sure that the passive layer can form on the surface. In very tight crevices, Stainless Steel 316 Round Bars is not always possible for the oxygen to gain access to the stainless-steel surface thereby causing it to be vulnerable to attack. Crevice corrosion of Stainless Steel 316L Round Bars is avoided by sealing crevices with a flexible sealant or by using a more corrosion resistant grade.
SS 316/316L Round Bar Specifications |
||
| Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 316/316L Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
| SS 316/316L Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
| SS 316/316L Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS 316/316L Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS 316/316L Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
316/316L Stainless Steel Round Bar Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316 | 0.015 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 16.0-18.0 | 2.0-3.0 | 11.0-14.0 | 67.845 min |
| SS 316L | 0.035 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 16.0-18.0 | 2.0-3.0 | 10.0-14.0 | 68.89 min |
Stainless Steel 316/316L Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 316/316L Stainless Steel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
SS 316/316L Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
316/316L Steel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 316 Round Bar
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Round Bar, where the passive layer on stainless steel can be attacked by certain chemical species. In normal atmospheric or water based environments, Stainless Steel 316 Square Round Bars will not corrode as demonstrated by domestic sink units, cutlery, saucepans and work – surfaces.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5