Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Coils, Sheets And Plates, which must be emphasized that this is only a guide to material selection. We also offer the same in different grades and specifications such as ASTM A515 Gr. 70 Carbon Steel Sheets Plates Coils, ASTM A515 Gr. 60 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 70 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 60 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 65 Carbon Steel Sheets Plates Coils, ASTM C45 Carbon Steel Sheets Plates Coils, EN8 Carbon Steel Sheets Plates Coils, and ASTM A572 Gr. 42, 50 Carbon Steel Sheets Plates Coils.
Carbon Steel Coils Manufacturer In India| Carbon Steel Coils Manufacturer In Mumbai| Carbon Steel Coils Exporter In India| Carbon Steel Coils Exporter In Mumbai| Carbon Steel Coils Supplier In India| Carbon Steel Coils Supplier In Mumbai| Carbon Steel Coils Stockist In India| Carbon Steel Coils Stockist In Mumbai
The range of Carbon Steel Plates allows them to be matched for corrosion resistance with the austenitic and ferrite steel grades. It is always important to assess the suitability of a particular Carbon Steel Coils with full knowledge of the corrosive environment. Structures of Carbon Steel Slitting Coils in swimming pools are known to be prone to SCC.
The use of standard austenitic stainless steel like Carbon Steel Perforated Coils is forbidden in this application. Sachiya Steel International is a well–known dealer and exporter for high-quality CS Plates, which is available in different sizes and shapes as per our clients’ requirements. The high strength in CS Coils also comes with lower ductility than austenitic grades.
Carbon Steel Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM A283, A516 / ASME SA283, SA516 |
| Thickness | : | 3/16″ to 24″ |
| Width & Length |
: | 1 mm TO 200 mm THK in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm |
| grade |
: | 517 GR. 60 / 70, IS 2062, IS 2002 |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc. |
Carbon Steel Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Carbon Steel Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Carbon Steel Coils
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Coils, Sheets And Plates, which must be emphasized that this is only a guide to material selection.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5